Date: Fri, 29 Mar 2024 13:38:52 +0000 (GMT) Message-ID: <981226784.4765.1711719532933@wiki.4psa.com> Subject: Exported From Confluence MIME-Version: 1.0 Content-Type: multipart/related; boundary="----=_Part_4764_1241989802.1711719532933" ------=_Part_4764_1241989802.1711719532933 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Content-Location: file:///C:/exported.html
Applies to VoipNow 3 and higher!
This article explains how to set u= p a Cisco/Linksys SPA phone terminal that will be used with the VoipNow pho= ne provisioning module. These recommendations apply to the following phone = devices:
Also, you can follow these instructions even if you're doing this for th= e very first time.
Assuming that your phone is reset to the default configuration:
For more information on the physic= al installation, check the phone terminal's user guides provided by the ven= dor.
If the administrator has set up DHCP, the phone will automatically get i= ts network parameters from the DHCP server. At this point, you can skip to = the Configuration of phone provisioning parameters section.
If the administrator has not set up DHCP, you must assign a static IP ad= dress to the phone. To do this, take the following steps:
STEP 1: Press the Setup =
;key on the phone pad. The Setup menu is display=
ed on the LCD screen. Use the up and
STEP 2: Navigate to the Network entry. Press the key corresponding to the select option on the screen (i.e. the left key under the LCD screen). Th= e Network menu will be displayed on the LCD scre= en.
STEP 3: Press the key corresponding to the edit (or select on newer pho=
nes) option on the screen.
STEP 4: Press the key corresponding to the y/n option until No is displ=
ayed on the LCD screen. On SPA 500 series, navigate to Wan Con=
nectionType.
STEP 5: Press the key corresponding to the ok option on the screen. The settings will be saved and=
you will be returned to the Network menu. On SP=
A 500 series, press the option key until you get=
StaticIP on the screen. Press the =
save soft key.
STEP 6: Navigate to the Non-DHCPIP Ad= dress entry and press edit.
STEP 7: Using the phone keypad, enter the IP addre=
ss assigned to the phone. This address must be provided by the VoipNow syst=
em administrator. Use the * (star)
key to type . (dot)
.
STEP 8: Press OK to save the= settings and return to the Network menu.
STEP 9: Repeat steps 6, 7, 8 for each of the follo= wing entries: Non-DHCPSubnetMask, Non-DHCPDefaultRoute, Non-= DHCPDNS1, Non-DHCPDNS2.
STEP 10: Press the key corresponding to the <= strong>save option in the Network = menu in order to save your network settings and go back to the Setup menu.
STEP 11: Next, select the Restart entry. Press the key corresponding to select and then press OK.
STEP 1: Open a web browser and type htt=
p://<Non-DHCPIP Address>/admin/advanced
in the address ba=
r. Assuming that everything was configured correctly, the browser should di=
splay the phone web interface.
You can find the IP address assign= ed to your phone by pressing the Setup button. Use the dow= n arrow key to navigate= to the Network entry. Press the key corresponding to sele= ct and locate the = CurrentIP&nbs= p;entry.
STEP 2: Configure the provisioning feature by foll= owing the next steps:
At this point, you should be able to make your first phone call.
If your administrator lets you provide the link for the phone yourself, = then you should take the following steps:
STEP 1: Log in to the VoipNow web interface with y= our extension account.
STEP 2: Click the Provisioning and SI= P icon available in the Telephony = section.
STEP 3: Customize the following fields taking into cons= ideration the explanations below.
Provisioning
Device Information
0018B9
.Device Settings
SIP Preferences
STEP 4: Click OK to sav= e the data. The provisioning link will be displayed at the top of the scree= n.