...
Choose installation language and press press Continue.
Configure network
...
Once in NETWORK & HOSTNAME, press press Configure.
Click on on IPv4 Settings and and choose the method for setting the IP address. If If you have an DHCP server inside your network, press press Save.
Otherwise, choose the Manual method and enter IP Address, Netmask, Gateway, and DNS server.
...
Once you have completed the IPv4 Settings, enable the switch and switch and confirm that the link appears as Connected.
Then press press Done.
Partition the disk
Automatic partition is selected by default, but you still have to confirm the installation disk.
Press Press INSTALLATION DESTINATION to to proceed with partitioning.
...
If you only have one disk dedicated for VoipNow, just press press Save.
Make sure that the disk you select is empty, otherwise it can lead to data loss!
...
Optionally, you may choose Localization options. Press Press Begin Installation.
Once the installation has started, press press ROOT PASSWORD to configure at least the root password for the shell.
...
Once installation is complete, press press Reboot to to start VoipNow. If the system is set to always boot from CDROM drive, remove the DVD.
...
Installation is now complete. Up next, configure the system using the web management interface.
To do so, open https https://<InstallationIP> in in your browser:
and log in to the interface using the following details:
...
It is vital for the system security to change the administrator password once you login!
Except where otherwise noted, content in this space is licensed under a Creative Commons Attribution 4.0 International.