Applies to VoipNow 3 and higher!
Assuming you have added a channel to the system and set up call routing correctly, you may still not be able to place calls to a public number for a couple of reasons. This article provides a workaround in case this happens.
Ensure you set a cost
STEP 1: Log in to VoipNow as a system admin.
STEP 2: Go to Channels in the main menu.
STEP 3: In the Channel Management page, select the channel to which you want to add destination costs.
STEP 4: Click the Manage channel costs icon in the Tools area. The Channel's Cost Management page will open.
STEP 5: Make sure there is a cost set for the prefix of the number you dialed. For example, if you dialed 17075068495, you should set a cost for 1, or for 17, or for 170, etc. If you have set a cost for 1 and another for 17, then (17) will be considered the better matching cost.
Check why calls still fail
STEP 1: Log in as
root o the VoipNow server using your favorite console, for instance Putty.
STEP 2: Run the following command to connect to an Asterisk console:
STEP 3: Then check the status of your channel by running the command below:
sip show registry
If your channel status is
AuthSent, then an error must have occurred during the configuration process of your channel parameters. Go back to the interface and check the channel information. If your channel status is
Registered, you may move to the next step.
STEP 4: You need to make sure you set up a compatible codec for the channel.
For example, if your channel provider accepts only
alaw and you set up the channel parameters to allow only
ulaw, then your server cannot communicate with the remote server.
Be aware that
G.729 is not a free codec. If you want to use it, you need to purchase a license from Digium.
|Content by Label|
Except where otherwise noted, content in this space is licensed under a Creative Commons Attribution 4.0 International.