| Excerpt |
|---|
This page describes the steps to be followed by all the users that are installing their phone terminal for the first time. |
| Table of Contents | ||
|---|---|---|
|
...
| Note |
|---|
On fresh install, the Provisioning global IP is not set. To be able to provision an extension, you need to set the provisioning preferences. |
Configure phone provisioning parameters
...
Then you need to locate the Config Server Path field or similar and fill it with the provisioning link provided by your administrator or obtained by yourself using following the procedure steps below.
Please note that these instructions are general. You should search for your phone's specific guide in the Knowledge Base area.
Obtain provisioning link
...
- Log in to the VoipNow web interface with your administrator or your user account.
- After choosing the extension for which you want to configure provisioning, click the Provisioning and SIP icon available in the Telephony section.
- Select the Use provisioning option from the Provisioning fieldset so that the phone device associated with the extension gets all its setup parameters from the provisioning server. Otherwise, the extension owner has to set them manually.
- Fill in the required fields grouped into the remaining fieldsets:
- Device Information
- Device Settings
- SIP Preferences
- Extension Virtualization
- Click OK to save the data. The provisioning link will be displayed at the top of the screen.
- Access the phone web interface from a web browser. The address of the web interface depends on the phone model.
| 4psarelated | ||
|---|---|---|
|
...
| |
...
Except where otherwise noted, content in this space is licensed under a Creative Commons Attribution 4.0 International.