Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Updated using 4PSA automated script


Note

Applies to all VoipNow versions!

Let's say your customer calls and complains somewhere along the lines of My phone is ringing, it's showing number 100 (or some other strange number) and when I pick up, there's nobody there(or there's complete silence)I've had enough of these calls, please make them stop!

If you hear something similar from your customers, it means they're experiencing what's typically known as ghost calls or phantom calls. These calls are not placed or routed by the VoipNow system. They are placed on your customer's phones straight from the Internet, completely bypassing VoipNow. These calls are possible either because of a poorly configured auto dialer or due a SIP scanner trying to find vulnerabilities in phone networks for fun or for profit.

Step-by-step guide

What are ghost calls

To better understand what ghost calls are, let's take a look at the two paths that the calls to your customers' phones may take.


The black arrows indicate the regular call traffic: your customer's phones are connected to the router/switch installed in the office, then to the VoipNow server which in turn connects to the SIP provider's server.

The red arrows indicate the path of a ghost call, which bypasses the SIP provider's server and the VoipNow server entirely. Instead, the call attempt is targeted directly to your customer's router or directly to the customer's phones (if they're directly connected to a public network). It's easy to see that nothing can be done on the VoipNow server or on the SIP provider side in order to block these calls.

The good news is that your phones and network are not at risk as long as your phones' firmware is updated to the latest version available.

Don't forget that each SIP phone is basically a small computer; its software can have bugs and some of them may be critical causing the phones to crash or allowing phantom calls to be redirected to a premium destination, for which you will be charged.

When placed in large volumes, ghost calls can also keep your customer's phones completely busy for long periods of time, blocking legitimate calls.

Note

Make sure your phones are always running the latest firmware available from the phone manufacturer!

How to block SIP calls in the customer's location 

There are three ways in which you can block such calls:

  1. Change the local SIP port in the phone configuration - refer to the phone user manual to see if it's possible.
    or
  2. Use a firewall or the firewall features in the customer's router to block scanning attempts. Check the equipment's user manual for more information, or allow only incoming SIP traffic from the IP address of the VoipNow server.
    or
  3. Configure the phone to allow only calls from the IP address of the VoipNow server. Again, you will need to check the phone's manual for this.

Content by Label
showLabelsfalse
max5
showSpacefalse
cqllabel in ("phonecall","ghost","router","switch","server","sip") and space = currentSpace()

Except where otherwise noted, content in this space is licensed under a Creative Commons Attribution 4.0 International.