Page History

Discover the concept behind UC and how you can make money from it from it with as little effort as possible. Our stories are backed up by real-life experiences. Read all about saving time with easy management, saving money with automation, and profiting from the popularity of social networking.

...

First steps: Setting up your hardware infrastructure and configuration.

Hardware infrastructure, setup and configuration

The server is the central The center component of a hardware infrastructure designed to offer Unified Communications is the server. It is 's a physical / virtual machine with an Internet connection to which all computers and phone terminals are connected. Linux (CentOS and Rhel RHEL are also supported by VoipNow) and your PBX should be installed on this server. Its The hardware specifications rely vary depending on the network capacity and on the expected performance.

There are various methods of benefiting from a server.

...

In-house

...

If you already own an adequate server, you may install an IP PBX and

...

you'll be ready to provide

...

Unified Communications.

Hosted

Your server resides in a remote data center. It

...

's important that you choose a data center that

...

's geographically close to most of your customers

...

to provide redundant, low-latency connectivity.

In the cloud

Some organizations

...

offer infrastructure as a service. For instance, you can rent a server from Amazon

...

Web Services.

You have need to choose make sure your hardware configuration to meet meets your network's needs. You can decide on the performance you need your sever to be capable of by considering of your server taking into consideration the maximum number of concurrent calls you expect to have be made on the said server. The general formula is that for every concurrent call , you (with a G.711 uLaw codec), your server will use upapproximately the resources listed below.

...

...

...

...

How extensions affect the server

The number of simultaneous calls impact the performanceAnother way of figuring out what you server will have to stand up against is the total number of extensions on it. For example, if your server will provide VoIP for service to residential clients, most of the extensions will probably be phone terminals that Phone Terminals, which do not require plenty of many resources. On the other hand, But if you resell towards businesses, IVRsthings like IVR, Queues and other costly extensions will need a require more powerful hardware configuration.

Another issue that needs to be addressed is that of connecting your server to a public telephony network. This becomes of your concern especially when your server is in-house. To connect to such a network you will need a gateway that routes and translates calls between the two networks for the VoIP user. The telephone company provides one or more trunk lines to the customer for connection to the customer's PBX.

Getting the new hardware to do what you need: Setting up your software.

How the server handles PSTN

SIP trunks can route calls to/from PSTN networks on their own, no need for a physical gateway. You might be required by law to have a PSTN connection.

What about codecs

Codecs are designed to enhance VoIP calling sound quality. However, these codecs influence your server’s or your network’s performance.

For instance, G.711 uLaw and G.711 aLaw do not compress packages upon sending them. This means that they will improve your call quality, but they will consume bandwidth. On the other hand, if you use G729 – which is one of the most used codecs – the packages will be compressed and your call quality will be amplified, but this action translates into more CPU workload.

This is why it's recommended that you calculate your system to have at least 30% resources free most of the time, so that you won't have to worry about peaks.

Set up the software

VoipNow is a platform that includes an IP PBX, billing engine, a web-based administration interface and multi-tenant management.

At the core of the VoipNow system lays the IP PBX, or Internet Protocol Private Branch Exchange, which IP PBX is the core of the software system. PBX, or Private Branch Exchange, is a private telephony network used within a company. It is a software application that implements the basic functions of a traditional hardware PBX as well as next-generation digital services.

Basically, it acts like an automatic switchboard that connects users. In addition, it offers new services that traditional telephony doesn't have the technology to.

4PSA VoipNow is a product that includes an open source IP PBX (Asterisk) and various management systems that make it a completely hosted VoIP solution. Normally, a PBX does not have a graphical user interface and editing must be made manually directly on specific files. With VoipNow, software installation and administration are performed remotely on a browser interface.

lacks due to technology limitations or high cost.

...

Am I safe?

A major worry concern for most VoIP users is whether it is prone to hacking or not. Internet the system's security. Internet telephony may seem liable to hacking at first. In fact, all internet solutions are. The risks of using VoIP do not exceed those that have already been accepted by businesses using the internet as part of integrating the Internet with all their activities.The truth is that open source PBXs tend to

have a deficit in security. On the other hand, VoipNow has not been blamed for a hacking incident in the whole 5 years that it has been used. Troubles have come up that implied significant money loss for a few extensions. They were either caused by not being careful in keeping their password private or by using other PBX software besides VoipNow. The hacker was able to get inside the system through these and it affected VoipNow accounts, alsoCompromised user accounts can be easily detected with basic monitoring solutions and damage is usually restricted to a few international calls placed on the user's behalf, without affecting the system's integrity.

Call your colleague

...

All you need is a phone.

...

While most features of Unified Communications solely require a computer with internet access, VoIP calls are a little more pretentious. You will surely need a phone terminal to be able to make and receive calls. There are a few possibilities , and there's a sea of options to choose from these days.

One of them these options is to install a softphone on your computer. There are various softphones available online and some are free of charge. By installing this software, you can use your computer to make and receive calls as long as the program is running and provided that you have headphones or speakers and a microphone.

For a more familiar experience, you can purchase IP phones or even use regular phones. The main function of the phone terminal is to transform analog audio signal into digital and vice-versa. IP phones are built to do this, but regular phones can also be connected to a VoIP network using a VoIP adapter.

...

SIP carriers show you the world

After setting up your internal hardware infrastructure, you can make VoIP calls, but only inside your local network. To connect Connecting to the public telephone network , requires the services of one or more several SIP carriers are needed.

A SIP carrier is a VoIP carrier whose equipment supports the SIP (Session Initiation Protocol) standard. SIP is currently the most popular VoIP protocol on the Internet, used to connect millions of networks and devices.

SIP carriers operate an infrastructure that can route and connect the calls originating from to/from from your system to phone numbers on other infrastructures (IP networks or PSTN). They own media gateway machines that act as an interface between different types of networks by converting between the different transmission and coding technologies.

...

DIDs help you hear and be

...

heard 

With all the characteristics described above, you are will be able to establish VoIP calls. However, in order to receive calls, you will need DID or Direct Inward Calling. This feature can be offered by your SIP provider.

The telephone company provides the customer with one or more several trunk lines to the customer for connection to the customer's PBX and , allocates a range of telephone numbers to this line (or group of lines), and forwards all calls to such numbers via the trunk.

To reach users with VoIP phones, DID numbers are assigned to a communications gateway connected by a trunk to the public switched telephone network (PSTN) and the VoIP network. Calls originating in the VoIP network will appear to users on the PSTN as originating from one of the assigned DID numbers.

...

Automation makes it all easier

In addition to a visual interface, VoipNow also offers billing engine operations.

With a regular IP PBX, you most likely would have to export call records and then process them either manually or with using another software product. This However, this is not time-effective and the reports may not be precise.

VoipNow’s charging plans automate this operation for you and its the call history based reporting is always exact.