...
Set up Password Protection
Image Removed
Image Added
Screenshot: The Password Protection section of the Phone Terminal Setup page
...
Toggle status via the phone terminal
*11 - Activate/Deactivate password protection
You can activate/deactivate the password protection option by dialing *11. As soon as the Password Protection feature is enabled in the interface, the Phone Terminal extension owner can toggle the terminal status either from the interface or the terminal.
To block/unblock the phone terminal usage directly from the keypad, follow the steps below:
If access to the phone terminal is blocked:
- Dial *11. The system requires a password.
- Dial the password defined in the interface. As soon as you enter the correct password, you will be able to normally dial out/receive calls.
If access to the phone terminal is allowed:
- Dial *11. The system requires a password.
- Dial the password defined in the interface. As soon as you enter the correct password, the phone will be blocked.
| Note |
|---|
Incoming calls are not redirected to voicemail Voicemail unless the required feature has been previously enabled. |
Topics
Except where otherwise noted, content in this space is licensed under a Creative Commons Attribution 4.0 International.