Applies to VoipNow 3 and higher!
Jitter is a variation in packet transit delay caused by queuing, contention, and serialization effects on the path through the network. It usually occurs in higher levels on slow or heavily congested links. If no transfer is involved, jitter cannot be noticed. Yet, if a transfer occurs (via a Queue extension, an IVR extension or even with an Incoming call rule), one will notice a few seconds of audio delay.
Some phones can bypass this delay without problems. Some models require adjusting the Jitter settings (in case the phone has any).
This article describes how to fix jitter occurrences on Yealink and Cisco phones.
To adjust the Jitter Buffer on the phone, take the following steps:
STEP 1: Navigate to Phone → Voice → Jitter Buffer and set Type to Fixed.
STEP 2: Set the value of Min Delay, Max Delay, Normal Delay to 120.
STEP 3: Click Done.
Cisco SPA 504G/525G
Look for an option called Jitter Buffer Adjustment and disable it.
|Content by Label|
Except where otherwise noted, content in this space is licensed under a Creative Commons Attribution 4.0 International.