Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Updated using 4PSA automated script


Note

Applies to VoipNow 3 and higher!

In order to adjust timings for Calling Card extensions you need to set three global variables in the dialplan. This article explains how to do that.

Step-by-step guide

STEP 1: Connect to your VoipNow  server as root using a SSH client (e.g. Putty).

STEP 2: Open  the /etc/asterisk/extensions.conf file in an editor and add the statements below at the beginning of the file, in the [globals] section:

  • CACCCNUMBERTIMEOUT=<CACCCNUMBERTIMEOUT_value> | Set the number of seconds the extension will wait after the final digit when typing a calling card number. The default value is 6.
  • CACPASSTIMEOUT=<CACPASSTIMEOUT_value> | Set the number of seconds the extension will wait after the final digit when typing a password. The default value is 6.
  • CACNUMBERTIMEOUT=<CACNUMBERTIMEOUT_value> | Set the number of seconds the extension will wait after the final digit when typing a number. The default value is 6.
  • CACDIGITFIRSTTIMEOUT=<CACDIGITFIRSTTIMEOUT_value> | Set the number of seconds the extension will wait before entering the first digit. The default value is 6.

Content by Label
showLabelsfalse
max5
spacesKB
showSpacefalse
sortmodified
reversetrue
typepage
cqllabel in ("timing","extension","calling","card") and space = currentSpace()
labelskb-how-to-article

Except where otherwise noted, content in this space is licensed under a Creative Commons Attribution 4.0 International.