This document describes how to add nodes to the distributed infrastructure and how to assign them roles. |
To add a new node to your infrastructure:
It is not required to add a public IP address! Keep in mind the requirements of the different roles you might want to run on the node. The distributed database requires only one private IP.
This area is purely informative. It is not necessary for these IPs to be bound to the container that will eventually run the node. They could get there using any form of network virtualization, for example using NAT. |
Only a single role can be assigned on a node. The situation where you have multiple roles on a single node is specific to the product installation. Only the node you installed first will have multiple roles. Some roles might be deleted from that role and assigned to new nodes, but you must let the infrastructure controller role run there. |
Once the node has been added, you can assign it with a role:
Please note that the Distributed Database role cannot be assigned if there are more than 3 extensions on the server. |