This page contains instructions on how to manage channels.
Only the channels that are not currently in use can be disabled!
All channels added to the VoipNow system are listed in a table. You can enable or disable a table with a click on the S (Status) icon: for enabled for disabled
Once a channel has been disabled, calls cannot be routed through it. Also, if a charging plan uses an outgoing routing rules group that routes through the disabled channel, those rules are not used anymore.
Click the icon to manage the costs associated with the channel. If the channel is free of charge, the Channel Cost icon will be unavailable. For more information, please visit the Manage Channel Costs page.
The table allows you to filter the existing channels by name:
Whenever required, you can modify a channel's parameters to meet your new requirements. Just enter the channel context and click the Edit Channel icon in the Tools area.
For more information on how you can configure the options available, you may revisit the add section corresponding to the respective channel type:
Click the channel name in the Channels List. You are redirected to the Channel <channel_name> Management page which groups all the tools required to manage the channel and its phone numbers.
You may use the controls available in the Tools area to:
Please note that some channels cannot be deleted! Therefore, the checkbox that would allow you to have them removed, if selected, will be disabled.
To remove a channel: