This page contains instructions on the installation of the DNS Manager ISO Image. |
Even if you are installing DNS Manager only for a demo, it is always required to use a dedicated computer.
The DNS Manager ISO image is based on CentOS 5.x operating system.
Please keep in mind that automatic partitioning will erase your hard drive. |
<ENTER>
when the boot prompt appears. If you want the installer to automatically partition your hard-drive, write auto partition and press <ENTER>
.root
password.The installer will reboot the system and the installed DNS Manager distribution will boot. You will be asked to set up the IP address, the network mask, and the network gateway.
Make sure you enter the correct settings, otherwise you will not be able to access the server. |
Go to another computer and point your browser to:
https://<server_ip> |
Where:
<server_ip> is the IP of the server you installed DNS Manager on.
The DNS Manager login screen appears. You can login as the system administrator using:
Username: admin Password: welcome |
For future system updates, you will also need to check the Release Notes and the Command Line Installation instructions.