Overview
Preparing a hardware node for 4PSA DNS Manager takes less than 5 minutes.
4PSA DNS Manager is compatible with Virtuozzo 3 and higher versions, running on all supported Operating Systems.
Installation steps
As long as you adjust the VPS configuration to match the system usage, the performance will not be affected by virtualization.
4PSA DNS Manager can be installed on Virtuozzo VPS. It is shipped in Virtuozzo EZ templates. These templates simplify the software deployment. They can be installed like any other Virtuozzo application template, from command line or from VZCP.
To be able to install and use 4PSA DNS Manager on VPSes, you must prepare the Hardware Node:
- Download the 4PSA DNS Manager Virtuozzo templates from here.
- Install the template packages.
To install 4PSA DNS Manager in a VPS, you must simultaneously install all the template packages that start with dnsmanager*.
Post-installation recommendations
You can start using 4PSA DNS Manager right after installation.
First, change your browser as follows.
https://<vps_ip>:8550
Then log in with the following details:
Username: admin Password: welcome
Please change the password after your first login.
For further details, please refer to 4PSA DNS Manager User's Guides, that can be downloaded from here.
Except where otherwise noted, content in this space is licensed under a Creative Commons Attribution 4.0 International.